A unique mounting system can be tailor-made to satisfy your needs, we provide the necessary engineering evaluations to assess the feasibility of an out-of-the-box approach.

Design center in Germany
Manufacturing in Penang, Selangor and Johor
Technology based on heat treated aluminium extrusion profiles with 20 years of warranty against corrosion
Wide variety of selection for various mounting conditions – roof tiles, metal deck roof, flat concrete roof, bare earth etc.
Residential rooftop retrofit mounting system

Rooftop Mounted Systems mount-roof

mount-roof

for commercial and industrial facilities

Metal Deck Rooftops

mount-carpark

Can be installed on sheet metal, tar-bitumen, PVC and concrete roof membrane

All penetration points sealed with EPDM and warranty of 15 years against leaking (at penetration point)

For Mono-crystalline, Poly-crystalline and Thin Film Modules

Flexible tilt angle to suit installation location

Minimum system capacity: 1 kWp

Patented assembly system

20 years warranty against corrosion

Ground Mounted Systems

mount-ground

Ground Mounted Systems

– Hot-dip galvanized steel columns piled into ground
– Flexible mounting of aluminium structure (according to terrain surface)
– For Mono-crystalline, Poly-crystalline and Thin Film Modules
– Flexible tilt angle to suit installation location
– Minimum system capacity: 500 kWp
– Patented assembly system
– 20 years warranty against corrosion

Customised Mounting Systems

mount-custom

Customised Mounting Systems

It does not necessarily have to be the roof or the ground and it certainly does not necessarily have to be flat or tilted at a specific angle. For aesthetic reasons, architects and designers may let their ideas run wild to create an architecture masterpiece. A unique mounting system can be tailor-made to satisfy your needs, we provide the necessary engineering evaluations to assess the feasibility of an out-of-the-box approach.